Sistema Regional de Información
en línea para Revistas Científicas de América Latina,
el Caribe, España y Portugal

The objective of this study is to determine the existing concordance between the clinical and histopathological diagnosis of lesions in the oral mucosa at the Faculty of Dentistry of the University of Costa Rica (UCR). A retrospective study of 261 reports of oral lesions recovered from the biopsy archive of the UCR Faculty of Dentistry from 2008 to 2015. Of the total reports 165 were included in the analysis, 96 (36.8%) did not have any diagnostic hypotheses. The concordance between the clinical and histopathological diagnosis was verified by the Kappa test. Concordance with the first diagnostic hypothesis was presented in 114 (69.1%) cases, the value of kappa was 0.663 (substantial agreement) and 36.8% without clinical diagnosis only a description of the lesion.  The premalignant lesions presented an excellent concordance (kappa=0.902). The concordance of the group of non-neoplastic proliferative lesions was moderate (kappa=0.504) and the dermatological and autoimmune conditions with negligible concordance (0.157). Concordance occurred in the majority of the patients investigated with a value corresponding to a substantial agreement, however, the percentage of reports that did not have a clinical hypothesis should be improved.

Purpose: The aim of this study is to compare the shear bond strength of three high-viscosity bulk-fill composite resins applied as single layers of 4mm thickness and of one microhybrid composite resin applied incrementally with a thickness of 2mm on dentin surfaces prepared with different surface preparation methods. Materials and Methods: A total of 132 caries-free human molars whose dentines had been exposed were used. Three groups, each containing 44 teeth, were formed. The acid group was etched with 32% phosphoric acid; laser group was etched with Er, Cr; YSGG laser and the control group was prepared with silicon carbid paper. Following the application of bonding agent, composite resin materials were applied on teeth using teflon moulds of 4x4mm. The samples were then subjected to shear bond strength tests. Two-way variance analysis and Tukey HSD multiple comparison test were applied on collected data. Results: There was a significant difference between surface treatment methods used regarding shear bond strength (P<0.001). The highest shear bond strength values were detected in the “Acid” group while the lowest shear bond strength values were detected in the “control” group. On the other hand, there was no statistically significant difference among composite resins (P>0.05). Conclusions: Laser etching of the dentin tissues is not as effective as acid etching. Bulk-fill composites had similar effects compared with conventional composite resins with regard to bonding strength. More in vitro studies supported with clinical data are required to investigate the performance of bulk-fill composites and laser.

Objective: The aim of this study was to evaluate and compare the effects of the superficial application of two different modeling resins on the surface microhardness and discoloration of composite resins. Material and Methods: The present study used two different composites and modeling resins. The composites were placed in plastic molds. Subsequently, the modeling resins were applied on the surface of the two composite groups. The microhardness and color pertaining to all the groups were evaluated. The current study used the One-Way ANOVA and Kruskal Wallis tests, in order to perform the statistical evaluation (p<0.05). Results: The present study compared the microhardness pertaining to the groups and the highest microhardness values were observed in the Estelite Asteria group (none), whereas the lowest values were observed in the GC Essentia group (Ultradent). Moreover, the current study evaluated the color stability and the greatest discoloration was observed in the control group of the GC Essentia group, whereas the least discoloration was observed in the Estelite Asteria group that included the samples prepared using Ultradent Wetting Resin. Conclusions: The results of the present study demonstrated that the use of modeling resins, which facilitate the placement of composite resins, reduced the microhardness and discoloration of composite resins. The aforementioned effect can be attributed to the variations in the structure of the filling. However, further studies are warranted to support and verify the results of the current study.

There is insufficient information about the chairside polishing methods of polyether ether ketone material. Therefore, it is aimed in this study to investigate the effects of different polishing processes on polyether ether ketone surface roughness and hardness. A total of 66 disc-shaped specimens made of polyether ether ketone were used in this study. The specimens were polished conventionally and randomly divided into three groups (n=22). One group was designated as the control group, and no further treatment was applied. In the other two groups, the specimens’ surfaces were abraded with diamond burs and polished using two different polishing kits. Their surface roughness and Vickers hardness were measured, and environmental scanning electron microscopy and atomic force microscopy examinations were performed. The data were statistically analysed using analysis of variance and Tukey’s honest significant difference test (α=0.05). There were no statistically significant differences between the control and polishing kit groups in terms of either surface roughness or Vickers hardness (p>0.05). The polishing kits can be used reliably and effectively for polishing polyether ether ketone materials.

Cone-beam computed tomography (CBCT) is a 3D imaging technique widely used in maxillofacial diagnosis. The grayscale value (GSV) is a number that represents the amount of attenuation of the X-ray beam by the material contained in each voxel or structural unit of the tomographic volume. Similarly, in computed tomography (CT) used in medical radiology, the attenuation values are standardized in the Hounsfield Unit (HU) scale. Although GSV may have interesting potential applications in maxillofacial diagnosis, it is essential to know that HU differ from GSV. The latter are susceptible to multiple technical factors during the tomographic acquisition, so their value can vary among different CBCT scanners or when technical parameters are modified. Hence, GSV should not be extrapolated between different CBCT machines, and their use should be cautious while more investigation is available considering various equipment and acquisition protocols.

.

Research on gingival health of 12-year-old schoolchildren in Costa Rica is scarce. Since nutrition is an integral component of oral health, this study aimed to determine gingival status of 12-year-olds at Carmen Lyra Public School, San José, Costa Rica, and correlate these variables with the frequency of intake of different types of food and body mass index (BMI (kg/m2)). Sixty-two 12-year-old schoolchildren were recruited. A periodontist assessed Plaque Index (Silness and Löe,1964), presence of calculus, and Gingival Index (Löe and Silness, 1967). Gingivitis was defined as the presence of  bleeding on probing (BOP) on at least one site, and the extent was classified according to the percentage of teeth whose gingiva presented BOP limited: 25-49% of teeth tested; extensive >50% of teeth tested. A semi-quantified food consumption frequency questionnaire was administered. BMI was calculated for each participant. Overall Plaque Index was 1.18. Calculus was present on 40.40% of the sample, 19.4% had supragingival calculus and 21% had either supragingival/subgingival calculus or both. Presence of calculus was related with number of bleeding surfaces (p=0.030). Number of teeth with calculus was related to bleeding(p=0.029), and number of bleeding surfaces (p=0.009). Gingival Index was 0.97, mild gingivitis. Gingivitis was present on 96.8% of children examined. Limited gingivitis was present in 11.5% of children and extensive gingivitis in 88.5%. None of the variables measured differed by gender. No relationships were found between the consumption of starchy foods, animal and vegetable protein sources, fruit, vegetables, fast foods, sugar sweetened beverages and desserts with Plaque Index, calculus, Gingival Index, and BOP. Teeth calculus was related with being overweight (chi-square=0.038). BMI for males was 20.21 and females 20.11. BMI was not related to BOP or calculus. Within the limitations of this pilot study, we concluded the prevalence of gingivitis and calculus is high in the sample examined. A greater sample is needed to determine correlations between the frequency of foods evaluated and gingival health.

The objective was to analyze the periodontal condition severity and the occurrence of pathogenic microorganisms in the oral cavity of an adult population of an Afrodescent Community of northeastern Brazil. This is an observational and cross-sectional study performed through an oral clinical examination, using a standardized clinical record. For the subjects with periodontal disease, the bacterial biofilm was collected in a Petri dish containing 0.9% physiological solution to detect the presence of microorganisms Entamoeba gingivalis and Trichomonas tenax, and later observed under an optical microscope. Statistical analysis was performed by calculating the prevalence of periodontal disease and the frequency of the protozoa in the bacterial biofilm. Statistical significance of the relationships researched was verified by Fisher's exact test. It was evaluated 29 subjects pertaining to the Quilombola Patioba community, aged 35 to 44 years. The results showed that among the adults of the community, there was a high prevalence of periodontal disease (75.86%), being higher in the 1st and 6th sextants of the Community Periodontal Index (CPI). E. gingivalis positivity occurred in most sextants affected by gingivitis, while in the condition of periodontitis, this microorganism was not present in the 3rd, 4th and 6th sextants. In all sextants affected by periodontal disease, T. Tenax was observed when associated with gingivitis. It is worth mentioning the begging of the elaboration of health policies, social and professional commitment that foster a greater promotion of oral health and quality of life for the quilombolas of northeastern Brazil.

Palatal fissure is one of the congenital craniofacial malformations with the highest incidence worldwide, which compromises both the aesthetic and functional part, thus altering the vital functions: chewing, phonation, hearing and swallowing. The literature indicates that this anomaly occurs in 25% individually and 50% when associated with the cleft lip. One of the characteristics of these patients is the presence of notable malnutrition, caused by difficulty feeding, because they cannot exert enough pressure to suck breast or bottle milk; In addition, oral-nasal communication will lead to food entering the nostrils, causing regurgitation until possible bronchial aspiration. Given this problem, it is necessary to use an acrylic device capable of momentarily sealing the palatal fissure, in order to prevent the diversion of food and restore the sucking reflex in the infant. The objective of this study is to determine the effectiveness of the Three-dimensional Cleft Palate Shutter in a pediatric patient who attended the National Foundation of Maxillofacial Rehabilitation (FUNARMAF) in June 2019. The methodological design corresponds to an analytical – synthetic study since it was based on the analysis of a single case of a 5-month-old female patient, with a Unilateral Palatal Fissure (right), giving her the treatment. Results show that a closure of the oral-nasal communication was obtained, re-establishing the suction reflex. In all, it was observed that the use of this device is effective in patients with lip-palatal fissure since it acts as an adjuvant in breastfeeding and feeding the baby.

It has been suggested that oral mucosa diseases related to stress have a negative impact on the quality of life. However, the information regarding which aspects are the most affected is inconclusive. The objective was to compare the quality of life associated with oral health in two groups: Cases formed by 21 patients coming from a teaching clinic, suffering oral lichen planus, recurrent aphthous stomatitis, and burning mouth syndrome; Control formed by 42 healthy subjects matched for age and gender. Oral Health Impact Profile questionnaire was applied. Statistical analysis showed that group Cases has worse quality of life (p 0.03) than the one of controls, specifically on psychological discomfort (p 0.027), physical disability (p 0.004); and handicap dimensions (p 0.002; RM 5.63 IC1.58-20.80). It was concluded that patients suffering oral mucosa disease related to stress showed poor quality of life.